Palisade Fences
We offer quality steel palisade fence with a high level of protection at a reasonable cost.
Construction

PF-01: Palisade fence can be painted with different colors.

PF-02: Palisade fence with a high level of protection at a reasonable cost.

PF-03: Galvanized palisade fence pales with W profile.

PF-04: Palisade fence pales packaged in plastic film.

PF-05: Galvanized steel angle.

PF-06: Palisade fence pales and steel angles in container to delivery.
A standard panel is constructed from hot and cold rolled steel sections supplied for assembly on site. Panels consist of 17 vertical pales manufactured in "D" or "W" profile with a choice of tops. The pales are fixed to rolled steel angle horizontals which are supported by 102 × 44 joist posts.
- Fencing is supplied in 2.75 m wide standard panels for easy assembly on site.
- Special panels and posts to step or rake can be supplied if required.
- Non standard posts for cranking over walls, or base plated for fixing to concrete are also available.
- Our design department can assist clients with specific fencing problems or difficult site conditions and will offer solutions utilizing CAD based facilities available to them.
Pale Heads
- From the fierce triple pointed top to the round head, each top complements a particular requirement to meet a perceived level of security risk.
- A choice of "D" or "W" section is offered with a variety of heads and thicknesses chosen by the risk assessment for a particular site.

PF-07: Palisade fences for construction site security.

PF-08: Palisade fences for garden security.

PF-09: Palisade fence for power station protection.

PF-10: Palisade fences are used for farmland protection.

PF-11: Different pales types for choice.

PF-12: Palisade fences for residence protection.

PF-13: Palisade fence with razor wire topping.
Standard Height | Pale Section | Head Profile |
---|---|---|
1.2 m | 3.0 mm "D" | rounded & notched |
1.5 m | 3.0 mm "D" | rounded & notched |
1.8 m | 3.0 mm "D" | rounded & notched |
1.8 m | 3.0 mm "D" | triple pointed |
1.8 m | 2.0 mm "W" | triple pointed |
2.0 m | 3.0 mm "D" | rounded & notched |
2.0 m | 3.0 mm "D" | triple pointed |
2.0 m | 2.0 mm "W" | triple pointed |
2.1 m | 3.0 mm "D" | triple pointed |
2.1 m | 2.0 mm "W" | triple pointed |
2.4 m | 3.0 mm "D" | triple pointed |
2.4 m | 3.0 mm "D" | rounded & notched |
2.4 m | 2.0 mm "W" | triple pointed |
2.4 m | 2.5 mm "W" | triple pointed |
3.0 m | 3.0 mm "D" | triple pointed |