Table 1: Security Fence Project Materials
No. Product Specification Picture Quantity
1 Pipe Φ75 × 3.6 mm L=3.00 m
Galvanized: 550 gr/m2, Class B
Cut on top and plate base(300 × 300 × 4 mm)
4 hole for wire 2 for angle 50 × 50 × 6 mm
1600 pieces
2 Pipe Φ75 × 3.6 mm L=3.00 m
Galvanized HFCHS CLASS B: 550 gr/m2
45 degree cut on top, plate on base(300 × 300 × 4 mm)
280 pieces
3 Angle 50 × 50 × 6 mm L=0.85 m
Galvanized: 366 gr/m2
3 holes for wire and 3 holes for bolt
45 degree angle: 20–65 cm
3200 pieces
4 Chain Link Fence Galvanized
Galvanized 366 gr/m2 (Zn 95, Al 5)
mesh size: 50 × 50 mm
Tension: 600 N/m2
Wire diam. 3.00 mm
4000 m × 2.40 m = 9600 m2
5 Galvanized wire
Galvanized: 366 gr/m2 (Zn 95, Al 5)
Wire diam. 4 mm
Tension 600 N/mm2
16000 m
6 Galvanized wire
Galvanized: 366 gr/m2 (Zn 95, Al 5)
Wire diam.: 2 mm
40 kg
7 Barbed wire
Galvanized: 366 gr/m2
Barbed Spacing: (10 cm)
Barbed wire diam.: 2.5 mm × 2
28060 m
8 Fastening system
Barbed wire galvanized
1600 sets
9 Tensioner for wires: 3.05 mm
Galvanized: 366 gr/m2
1600 pieces
10 Plate: 600 × 25 × 3 mm
Galvanized: 245 gr/m2, S 235 JR
3 hole for wire
6400 pieces
11 Bolt M: 12 × 140 set
Galvanized: 366 gr/m2
Grade: 8.8
3 holes 4 mm
3200 sets
12 Fence door
as per attached drawing
10 pieces

Important notes

  • All the galvanised items Zn 95, Al 5.
  • The pipes according to CYS EN 10255 and galvanized according to EN ISO 1461.
  • The plates of quality S 235 JR, and according to CYS EN 10058:2003 and CYS EN 10025:1-2:2004.
  • The wire according to EN 1018-2 and has tension 600 N/mm2.
  • The barbed wire according to CYS EN 10223-1:1998 and has tension 350 N/mm2.
  • The chain link fence according to CYS EN 10223-6:1998, and has tension 600 N/mm2.
  • The angles of quality S 235 JR and according to CYS EN 10025-1:2:2004, has CE Declaration of conformity.

Inquiry for Our Product